Tamiya 58728 1/10 2023 RC Super Sabre Off-Road Kit

Manufacturer: Tamiya
Availability: 1 in stock
SKU: 58728
Ship to
Shipping Method
Estimated Delivery
No shipping options

At the Sharp End
This R/C model assembly kit is a re-released and updated version of the Super Sabre, a beginner-friendly buggy released in 1987. It is based upon a bathtub frame chassis with 4WD and CVA oil dampers: a recipe for off-road success enhanced by gripps hybrid tires. The aerodynamic polycarbonate body is pre-painted and pre-cut, and really looks the part on this speedy model.

Capable Off-Road Chassis
This shaft-driven 4WD chassis has a midship motor and sealed front and rear gearboxes, each containing a differential gear for smooth cornering. It is broken down into three easily-maintained sections: bathtub frame and gearboxes, and features short CVA oil dampers on the double-wishbone suspension, plus a front stabilizer to combat roll. Oval block/pin spike hybrid tires deliver superb grip, and together with the efficient 4WD make the Super Sabre right at home off-road.

Key Features:

  • 1/10 scale R/C model assembly kit. Updated version of the Super Sabre, a beginner-friendly buggy originally released in 1987. Length: 390mm, width: 234mm, height: 135mm.
  • The 0.7mm thick polycarbonate is fitted with the separate wing part and is pre- cut and pre-painted in silver.
  • Shaft-driven 4WD.
  • 4-wheel independent double wishbone suspension employs CVA short dampers II with a front stabilizer to help get the most out of the 4-wheel drive system.
  • ABS bathtub frame and other reinforced parts give superb durability and simplified maintenance.
  • Gearboxes are sealed to keep out dirt and contain differentials for smooth cornering.
  • Now Includes Pre-cut and Pre-Painted Body! Simply Apply your decals and paint your driver figure as you like.
  • Includes 540 brushed type motor

What's In The Box?

  • Tamiya 1/10 2023 re-release RC Super Sabre Kitset
  • Pre-Cut and Pre-Painted Body Shell
  • Decal Sheet
  • Assembly Instructions

Required for Operation (Not Included)

  • 2-channel radio & Receiver
  • Steering servo
  • Electronic Speed Controller
  • 7.2-7.4volt battery pack Compatible charger
  • Tools

This buggy refines wedge-shaped bodies to an artform!

A look at the shaft-driven 4WD chassis with ABS plastic bathtub frame and midship motor.

Red uprights add a splash of color to the suspension; this picture shows the front setup.

The front has a monoshock setup with an oil damper and stabilizer.

Wide H arms are employed at the rear with dual CVA oil dampers and dog bone drive shafts.

A close-up on the rear double wishbone suspension with its CVA short dampers II.

A dust cover for the steering servo and a chassis cover help keep dust and dirt away from critical areas.