Kyosho 11862 CURTISS P40 WARHAWK 50

Rotating retracts and flaps recreate the magic of the CURTISS P40 WARHAWK.
Fly one of WWII��s most famous combatants with this immaculate 50-class engine version!

In service in the lead up to WWII, the Curtiss P40 Warhawk started as the leading fighter plane for the British and American armed forces. Many variations came into existence and the Warhawk also flew under the colors of the many countries it was supplied to. Now this famous fighter plane can be enjoyed in all its glory with the power of a 4-cycle 50-class or 2-cycle 46-class engine. The balsa frame is covered in high quality printed MasterCote film that recreates the coloring of the original. In addition, the Warhawk��s unique split flaps as well as rotating retracts have also been replicated. The spinner included is suitable for either two or three blade propellers and stickers provide the choice of two types of nose art. As the Warhawk is mostly pre-assembled, simply attach the main wing halves and the tail wing, then install the motor and R/C system to complete. With these simple steps, the detailed scale finish of this model also makes it impressive as an interior display. But the true spirit of the Warhawk can be found in its flight performance and the sharp maneuverability of this fighter will please expert fliers, while the easy to fly characteristics also make it an ideal introduction to low wing flight. Relive the nostalgia of yesteryear with this realistic and easy to fly recreation of the famous Curtiss P40 Warhawk.

Almost all main parts are factory assembled and expertly covered with printed MasterCote color film, so only a short time is needed for completion.

Equipped with retractable undercarriage that rotates while folding to the rear just like the original. Linkage rods are also installed.

Realistic split flaps provide excellent lift and speed control during landings and takeoffs, as well as reproducing true fighter plane maneuverability.

In addition to standard 4-cycle 50-class engines, various other engines can be mounted for a choice of flight styles. However, the specified engine class delivers excellent flight performance.

Spacious radio room allows various size servos to be used. C of G can also be changed according to engine choice.

Specially designed spinner suits either 2 or 3 blade propellers and also replicates the form of the original. Includes 2 sets of nose art stickers so you can apply the finishing touch of your choice.

�� Included �� 260cc Fuel tank Equipped with retracts undercarriage Tires Rudder connected tailwheel Linkage parts Special spinner for 2-blade or 3-blade propeller

�� Required for Operation �� R/C System / 6-channel, 7-servo (6 x standard servo + 1 x low profile retract servo) for airplanes Engine / 4-cycle 52-56, 2-cycle 40-46 Propeller / D10xP6-D13xP7 Engine starting tools and fuel Batteries for R/C system

Technical Data

Length	1,182mm
Width	1,422mm
Weight	2,800g (approx.)
Engine	4-cycle 52-56 class (sold separately), 2-cycle 40-46 class (sold separately)
Wing Area	34dm2
Wing Load	82.35g/dm2 (approx.)
Wing Type	Original Semi-Symmetrical
R/C System	6-channel, 7-servo (1 x low profile retract servo sold separately)