Detrum GAVIN-6C Programable Transmitter With RXC6 Mini Receiver

Mode 2

Introduction

GAVIN-6C is a 2.4GHz 6-channel transmitter applicable for airplane, helicopter and multi-copter. Using low power devices leads to longer battery life. Support four stick modes to meet different operating habits. Support Trainer and Fail Safe functions which provide security for users. GAVIN-6C could provide the USB upgrade function and be used to set the programmable item of the flight controller for airplane.

RXC6 mini receiver is a 2.4GHz 6-channel normal receiver with mini size. By using diversity antenna, can automatically switch the signals to ensure the stability of the received signal. The RXC6 will set the output according to transmitter’s Fail Safe function when receiver cannot receive signal.

All using the DSSS&FHSS dual spread spectrum technology,  will enhance the transmitter by increasing the anti-interference performance and transmission distance, even can controlled normally in city center, do not worry about the strong interference from high voltage lines, signal towers, city WiFi, etc.

Features

GAVIN-6C transmitter

- Applicable for airplane, helicopter and multi-copter.

- 30 model memory

- Adopting 2.4GHz direct sequence spread spectrum (DSSS) and multiple frequence-hopping spread spectrum (FHSS) technology, the R/C system has high receiving sensitivity and strong anti-interference capability, can support a stable operating for more than 1km on the ground and more than 1.6km in the air.

- Adopting wireless chips, with extended power amplifier (PA) and low noise amplifier (LNA) can extremely improve the system output power and receiving sensitivity.

- The transmitting efficiency is greatly improved by using all-band antenna on transmitter.

- Can experience a smooth flight operation by using the 4096 section precision sticks and selecting four stick modes.

- Using low power devices could reduce the transmitting power, also lead to low battery power consumption and longer battery life.

- USB upgrade function always keeps your GAVIN-6C the latest program.

- Support Fail Safe function, which could predefine the servo position by transmitter when receiver out of control.

- Trainer function make a skilled instructor can teach a student with fly skills.

- Can be used to set the programmable item of the flight controller for airplane.

RXC6 mini receiver

- Using ARM M3 processor, provides strong resolution capability.

- The size of RXC6 is super small (33*20mm), it is more suitable for small-scale aircraft which can fly in the park.

- Adopting 2.4GHz direct sequence spread spectrum (DSSS) and multiple frequency-hopping spread spectrum (FHSS) technology, the receiver has high sensitivity and strong anti-interference capability, can receive signal stably for more than 1,000 meters in the air.

- By using diversity antenna, can automatically switch the signals to ensure the stability of the received signal.

- Each transmitter has an individually assigned, unique ID code. Once the binding is made, the ID code is stored in the receiver and no further binding is necessary after restarting the receiver.

- When the aircraft flies out of range, the receiver cannot receive a valid RF signal from the transmitter, and will move the servos to predefined position.

Specifications

GAVIN-6C

Channel: 6-channel

Transmitting frequency: 2.4GHz

Spread spectrum: DSSS&FHSS

Power supply: AA batteries 4*1.5V, Ni-MH batteries 4*1.2V, 2S Li-Po

Consuming current: less than or equal to 120mA (test mode); less than or equal to 230mA (Operating mode).

Output power: 10mW (test mode); 100mW (Operating mode).

Output pulse: 1000ms~2000ms (neutral 1500ms)

RXC6 mini receiver

Dimension: 20*33*12.5mm

Weight: 6.9g

Frequency: 2.4GHz

Communication distance＞1.1km

Power Supply: 3.6V~16V

Output Signal: PWM

Packing lists

GAVIN-6C transmitter  ×1

RXC6 mini Receiver  ×1

Bind Plug  ×1

Introduction Manual  ×1

Simulator Converter  ×1 (optional)

9g Servo  ×4 (optional)