ZTW A-ZTW100A 100 Amp HV Opto ESC
[A-ZTW100A]

A-ZTW 100A HV OPTO is a new generation of brushless and sensor less speed controllers with the control of micro processor. Its performance in terms of compatibility, reliability and stability can compete with world famous brands.

Specification:

1.1. Output: Continuous Current 100A, Burst Current 120A, (no less than 10 seconds)
1.2. Input: 6-12 cells Li-Po or 18-38 NiMh/NiCd
1.3. BEC No Output:
1.4. Dimension (mm): 34*52*20
1.5. Weight: 105g

Features:

Extremely low internal resistance
Automatically detects the number of cells within the battery pack.
Super smooth and accurate throttle linearity
Safety thermal over-load protection
Auto throttle shut down in signal lose situation
Supports high RPM motors
Power arming protection (prevents the motor from accidentally running when switched ON)
 

New Advanced programming software
Our ESC allows you to program all functions to fit your specific needs, which makes it very efficient and user friendly:

1.  Programmable brake setting (we recommend using brake for only folding props applications)
2.  Programmable battery type (LiPo or NiCd/NiMh)
3.  Programmable low voltage cut off setting
4.  Programmable factory default setup restore 
5.  Programmable timing settings (to enhance ESC efficiency and smoothness)
6.  Programmable soft acceleration start ups (for delicate gearbox and helicopter applications)
7.  Programmable governor mode (for helicopter applications)
8.  Programmable motor rotation (clockwise counter clockwise)
9.  Programmable switching frequency
10. Programmable low voltage cut off type (power reduction or immediate shutdown)

All ZTW speed controllers are supplied without an on/off switch. I feel this is a positive move and firstly eliminates the risk of accidentally leaving the drive battery connected leading to irreversible damage to your Li-Po battery and secondly removes the need to fasten the switch securely to prevent accidental switch off.

All ZTW speed controllers feature the same programming. Programming can be accessed using either your transmitters stick or with the optional programme card that we would strongly recommend.

ZTW controllers are supplied without connectors but feature pre-tinned wires for easy soldering.

All ZTW controllers are supplied bagged