DA/DLE-30-55 Prop Drill Jigs for DA30/55
[DJ-DLE-30-55]

Prop & Back-Plate Drill Jigs for HP-50 DA50 DLE50 DLE55 JC51 DLE30

Ensures straight drilling of propeller and spinner back plates.
Knurled O.D. which makes it easier for fixture removable.
Please choose the right size of drill before you fix the jig on to your propeller.

5mm drill are used for drilling HP-50 DA50 DLE50 DLE55 JC51 propeller.
4mm drill are used for drilling DLE30 propeller.

Please Note:

It is best to drill propeller from the back face. Back out drill several times as you go to clear wood from the bit to ensure a smooth, accurate hole. Do not force the bit through the prop. Place bolt in first hole after drilling to help with alignment when drilling other holes. Please always orientate the prop with blade tips at 9 & 3 oclock or horizontal to the ground with the compression stroke before drill. In case of dead stick landings this can save your prop and your airframe.