|
Due to the size of this plane we can not offer free shiping, we will quote the shipping price before sending the plane.
Paint scheme is like that of the main photo. The photos below show the actual plane but with a different paint scheme.
Introduction:
Our airplanes are built by craftsmen from the best quality balsa and plywood available. Careful consideration of each component material insures light weight structures that are strong enough to stand-up to the most extreme 3D maneuvers.
Each and every airplane is hand built to the highest quality standards. Utilizing proven interlocking building techniques combine with light rigid structures provide great flying airplanes. Components are built in jigs to ensure warp free surfaces such as fuselage, wings, and stabilizers. Proven competition designs for extreme 3D flight are the essence of the Thunder Tiger TOC airplane series. Ace Hobby Distributors, Inc. is proud to be the exclusive distributors of Thunder Tiger TOC Series Airplanes in North America. We are committed to providing quality, service, and value. Contact your local dealer and or Ace Hobby Distributors today for your next 3D/IMAC airplane.
Wing Span: 95"
Wing Area: 1,742 sq. in.
Length: 89.3" Weight: 21.5 lbs.
Wing Loading: 26 oz/sq. ft
Engine: 70-85cc
Wingtube: Aluminum 38 x 848mm - 13.5 oz.
Wingtube: Optional Carbon Fiber / Save 6.5 oz.
Stabtube: Aluminum 18mm x 440 - 2.2 oz.
Landing Gear: Aluminum 14 oz.
Landing Gear: Optional Carbon Fiber / 7 oz.
Features:
Designed for precision aerobatics and 3D
Professionally covered in Ultracote ®
Strong, Light Weight Construction
Large control surfaces double beveled for maximum control throw
Canister and Pipe Ready!
Heavy duty nylon hinge
Aluminum Wing Tube
Aluminum Stab Tube
Hardware Package Included
Great vibrant color scheme
20 to 30 hours of building time
Included Hardware
Aluminum spinner
Fuel tank
Aircraft grade aluminum wing tube
Aluminum main gear
Rubber wheels
Aluminum stab tube for removable stab
Control horns
Heavy duty nylon hinges
Wheel pants
SAE bolts and nuts
Accessories Needed:
Radio Set - 6-Channel computer radio, x7 High torque servos, x1 High speed standard, x2 Heavy duty switches
Extensions - x4 - 18" inch wings, x4 - 12" inch tail, x2 - 6" inch throttle
Batteries - On board - (2-Cell lithium 3,200 mAh, 6 volt regulator) / Ignition - (2-Cell lithium 2,500 mAh,6 volt regulator). Or a 5-cell Nimh Packs for ignition and receiver.
Engine - 70-85cc Engine
Adhesives - Zap CA - (Thin), ZAP-A-GAP - (Medium), Slow-Zap CA - (Thick), Formula 560 Canopy glue,
Z-poxy 30 minutes (PT-39).
Tools - Pliers, Clamps, Crimping pliers, Push-pins, Tape, Sand paper, Screw drivers, Drill and Bits, Marker,
Hobby knife, Ruler, Tape measure, Rotory tool.
|
Apparel / Clothing
Bags and Carry Cases
