Sorry - this product is no longer available

Skyrc SK-100008-14 IMAX B6AC V2 AC/DC Battery Charger

Skyrc SK-100008-14 IMAX B6AC V2 AC/DC Battery Charger
Manufacturer: SKYRC
Availability: Out of stock
SKU: SK-100008-11

Lithium Battery Meter
Plug your LiPo/LiIon/ LiFe balance plug into the charger and use the battery meter as a voltage tester to quickly see the voltage readings from each cell.

Internal Resistance Meter
Use this function to measure the resistance in each of your lithium battery's cells. This helps determine the health of your cells, to be sure you are getting the most power out of them.

Terminal Voltage Control
The voltage at which the charger cuts off the charge to each cell can be adjusted.
  LiPo 4.18V-4.25V (Default 4.20V)
  LiIo 4.08V-4.20V (Default 4.10V)
  LiFe 3.58V-3.70V (Default 3.60V)

PC Connectivity
You can monitor pack voltage, cell voltage and other data during the charging process. View charge data in realtime graphs. You can also control charging functions and update the firmware on the charger when new updates come out. The software (PC Only) can be downloaded from SKYRC's website for free.


  • High 6.0Amp Charge Rate
  • Balance Charges & Balance Discharges LiPo, LiON, LiFe (1S-6S cells)
  • Storage Mode to Preserve Battery Longevity
  • Charges NiMh, NiCd (1-15 cells)
  • AUTO charge mode for NiMh
  • Charges Lead-Acid (2V-20V)
  • Many Safety Features
    • Capacity Cutoff
    • Time Limit Cutoff
    • Temperature Cutoff
  • 10 Battery Memory Storage Settings
  • NiMh Cycling, Charge>Discharge, up to 5 times to refresh battery life
  • User definable charge rates from 0.1 amps to 6.0 Amps
  • 50 Watt max output. Charge Amperage auto adjusts depending on battery voltage. (i.e. Charge rate for 3S LiPo: 50W/11.1V = 4.5A max charge rate)
  • Balance Port Built In (Balances 2S-6S Batteries) (Uses Align/E-Flite/CSRC style Balance Plug Port) (Thunder Power adapter available separately, GTP1005)
  • Comes with 5 different charging plugs
    1. Dean's Plug
    2. Futaba / Receiver
    3. JST
    4. XT60
    5. Alligator Clip

Menu Options:

  • LiPo, LiIo, LiFe
    • Balance Charge (Balances cells inside of battery for optimal performance & safety)
    • Charge
    • Fast Charge
    • Storage Mode (Brings battery to approx. half charge, best for long term non-use)
    • Discharge
  • NiMh, NiCd
    • Charge
    • Auto Charge (Set the upper charge amperage and the charger does the rest)
    • Discharge w/ adjustable terminal voltage
    • Re-Peak (Top the battery off 1, 2, or 3 times repeatedly)
    • Cycle (Charge>Discharge or Discharge>Charge. 1-5 times)
  • Pb (Lead Acid batteries such as the battery in your car)
    • Charge
    • Discharge
  • Battery Meter (Shows the voltage of each cell in teh lithium pack. Press INC button to see the Total Voltage, Highest Voltage and Lowest Voltage)
  • Internal Resistance Tester (Shows each cells internal resistance. Press INC button to see the Total Resistance, Highest Resistance and Lowest Resistance)
  • System Settings
    • Safety Timer (The charger will stop charging after the specified time. ON 1-720min adjustable, OFF)
    • Capacity Cutoff (The charger will stop charging once it has reached the specified mAh. ON 100-50,000mAh, OFF)
    • Temp Cutoff (Requires optional Temperature Probe. Charger will stop the charging if specified temperature is reached. ON 20C/68F-80C/176F, OFF)
    • Temperature Unit (Choose which temperature units are displayed)
    • Rest Time (This allows the battery to rest and cool down between cycles. 1-60min)
    • NiMh & NiCd Sensitivity (Determines how the battery is detected to be fully charged. Default of 4mV/cell, 5mV-15mV/cell adjustable)
    • Key Beep & Buzzer (Turn the sounds on or off for button pushes and charger tones)
    • Input Power Low Voltage Cutoff (If the DC power supplied tot he charger falls below a certain threshold, the charger will stop charging. 10.0-11.0V)
    • Load Factory Settings
    • Version (Indicates the hardware and firmware versions)
    • Serial Number (Indicates the charger's unique serial number issued by SkyRC)

SkyRC offers a great 1 Year warranty on their chargers. This warranty covers manufacturers defects. This warranty does not cover end-user misuse or abuse. In the event of a repair/replacement the customer is responsible for shipping the unit to us in NY, while we will cover the cost of shipping the unit back to the customer.

Operating Voltage Range: AC 100 - 240V / DC 11 - 18V
Circuit Power: Max. 50W for charging, Max. 5W for discharging
Charge Current Range: 0.1 - 6.0A (Amperage auto adjusts to 50W max based on battery voltage) (50W / Battery Voltage = Max Charge Amperage)
Discharge Current Range: 0.1 - 2.0A (5 Watts)
Current Drain for Balancing:: 300mAh/cell
NiCd/NiMH Battery Cell Count: 1 - 15 Cells
Lithium Battery Cell Count: 1 - 6 Series
Pb Battery Voltage: 2 to 20V
Weight: 626g
Dimensions: 135mm x 144mm x 36mm

  • Genuine SkyRC iMAX B6AC V2 Multi Function Balance Charger w/ Built in Power Supply
  • AC Power Cord
  • DC Power Cord
  • Built in JST-XH Balance Ports (2S-6S)
  • Dean's Charge Lead
  • JST Charge Lead
  • Futaba / Receiver Charge Lead
  • XT60
  • Alligator Clip Charge Lead
  • Manual
  • Genuine/Authenticity Holographic Sticker
  • SkyRC Warranty (Handled directly by us!)
Customers who bought this item also bought

Nylon XT60 Connectors Male/Female x1 Pair

Nylon XT60 Connectors Male/Female x1 Pair

Wild Scorpion 3S 11.1v 2200mAh 30C EC3 Plug

Wild Scorpion 3S 11.1v 2200mAh 30C EC3 Plug



Lipo Safe Charge & Store Bag

Lipo Safe Charge & Store Bag