SKYRC D200 is a twin-channel charger with two independent circuits which can charge two different kinds of batteries simultaneously. It also supports power distribution in AC mode to make full use of the power when charging a small battery in one channel and allocate all remaining power to charge another big battery pack.
What’s more, users could set the terminal voltage by themselves and connect it to PC for PC control and firmware upgrade. Besides that, users could also use it as Lithium Battery Meter and Battery Internal
Resistance Meter. There are Automatic Charging Current Limit, Capacity Limit, Temperature Threshold and Processing Time Limit which makes the charger safe to use.
SKYRC D200 is a high-performance, micro processor control charge/discharge station with battery management suitable for use with all current battery types, with integral equalizer for six-cell Lithium-Polymer (LiPo), Lithium iron phosphate(LiFe) and Lithium-Ion (LiIon) batteries; maximum 20A charge current and maximum 200W charge power. The additional LiHV mode is able to charge the new generation of LiPo batteries with an end of charge voltage 4.35V.
Additionally, it has a built in soldering iron that can heat up to 450℃. With heavy duty 60W, the temperature is adjustable from 200-450℃.
•DC Input Voltage : 11-20V
•AC Input Voltage: 100-240V
•Display Type: 128x64
•LCD Display Backlight: Cool White
•Case Material: Plastic
•Controls: Five Buttons
•Case Size: 197x182x71mm
•PC Communications: USB Port for PC Control & Firmware Upgrade
•External Port: 2-6S Balance Socket-XH, Temperature Probe Socket,
Iron Socket, Battery Socket, DC Input, Micro USB Port for PC.
•Delta Peak Detection for NiMH/NiCd: 3-15mV/cell / Default: 4mV/cell
•Charge Cutoff Temperature: 20ºC/68ºF-80ºC/176ºF(adjustable)
•Charge Voltage:•NiMH/NiCd: Delta peak detection
•LiPo: 4.18-4.25V/cell LiIon: 4.08-4.2V/cell
•LiFe: 3.58-3.7V/cell LiHV: 4.25-4.35V/cell
•Balance Current: 300mA/cell
•Reading Voltage Range: 0.1-26.1V/cell
•Battery Types/Cells:•LiPo/LiIon/LiFe/LiHV: 1-6cells
•Battery Capacity Range:•NiMH/NiCd: 100-50000mAh
•Charge Current: Channel A: 0.1-20A; Channel B: 0.1-10A
•Safety Timer: 1-720minutes off
•Charge Wattage: AC 200W DC 200W+100W
•Discharge Current: (0.1A-5.0A) x2
•Discharge Cut-off Voltage:•NiMH/NiCd: 0.1-1.1V/cell
•LiPo: 3.0-3.3V/cell LiIon: 2.9—3.2V/cell
•LiFe: 2.6-2.9V/cell LiHV: 3.1-3.4V/cell
•Discharge Wattage: 10Wx2
•Balance Cells: 2-6 cells
•Memory: 10x2 Different Charge/Discharge Profiles
•Charge Method: CC/CV for Lithium Types and Lead (Pb) Batteries
•Delta-peak Sensitivity for NiMH/NiCd.
•SKYRC D200 Charger
•XH Adaptor X 2
•Charging Cable X 2
•Banana Connectors with XT60 Connector Charging Cable X 2
•Soldering Iron Handle
•Soldering Tip (Pencil Tip)
•Soldering Tip (Chisel Tip)
•Soldering Iron Stand