HHAtomCombo Hobby Hangar Atom 500 FBL Super Combo

We've put together an awesome combo that gives you an Atom 500 FBL and all the other bits you need to get started.

For only $1169.00 you get EVERYTHING listed here:

1x Compass Atom 500 FBL 

3x Align DS510 Digital Servos on Cylic

1xAlign DS520 Digital Servo on Rudder/Tail

1x Align 3G Flybarless System

This combo kit is incredible value.  All you need is a 6 channel transmitter and receiver, batteries and charger and you're in the air.

The right tools make the building job easier and can give you a better end result. Here's a few we recommend for the job:

• The Align Hex/Allen Screwdriver Combo Pack contains all the sizes of driver you'll need to build any of the Compass helis.
• Ball Link Pliers make uncliping ball links easier. Beats using your fingernails that's for sure.
• A Ball Link Sizing Tool will help loosen tight ball links reducing friction in the head giving you more power and greater agility
• A Pitch Gauge is essential.  It allows you to read your main blade pitch angle and makes leveling your flybar paddles easy. Both are important to get right if you want your helicopter to fly smoothly
• A hot Soldering Iron makes soldering much easier.  Doing a tidier job, being able to work with larger gauge wire, and less chance of burning your fingers are just some of the reasons a good soldering iron is invaluable
• Using Phoenix R/C Flight Simulator will reduce the amount of time it takes you to learn to fly.  By learning to fly on the simulator first you WILL reduce the number of times you crash your actual model.  Phoenix RC Sim will save you time and money. HIGHLY RECOMMENDED.
• A Swashplate levelling tool is great to have when setting up and maintaining your helis.  With this tool you can make sure your swashplate is level at the bottom/middle/top of it's travel.  Using this tool will help ensure your heli doesn't veer off in one direction when moving your collective up and down.
• Get even More Power and reduce flying weight with these batteries from Flight Power
• We've all seen what happens when the blades hit the deck. Trainer skids help stop the helicopter from rolling over preventing the blades from contacting the ground on those hard landings when you're learning.
• Make sure your measurements are accurate with these Digital Vernier Calipers